Spring Cleaning Shortcuts

April 2, 2012 By

Spring Cleaning ShortcutsIt’s April in Delray Beach and warmer weather is coming. It’s Spring Cleaning season. Do you have a checklist?

In some households, spring cleaning is an annual ritual, taking anywhere from a full day to an entire week to complete. Room-by-room, foot-by-foot, dust, dirt and grime are replaced with cleanliness and shine.

No matter in which way to you choose to tackle your chores, though, the people at Real Simple have you covered. The magazine’s website provides a thorough, detailed walk-through of the most common spring cleaning tasks. It also offers a “shortcut” series.

For example, the section of cleaning area rugs and rooms with wall-to-wall carpeting is a chore Real Simple lists as lasting “a morning”. The shortcut version, however, is noted to take just 10 minutes.

Some of the other areas covered in the Real Simple spring cleaning guide include :

  • Windows (4-6 hours long version; 15 minutes each “shortcut” version)
  • Curtains (30 minutes per panel long version; 10 minutes per panel “shortcut” version)
  • Upholstery (25 minutes per piece of furniture long version; 5 minutes per piece of furniture “shortcut” version)

You’ll need tools for your spring cleaning tasks including special cleansers, sponges, rags and vacuums. In some cases, you may want to rent equipment from a local hardware store. For example, deep-cleaning an area rug with a steam cleaner may be more time-effective than scrubbing it clean by hand.

Then, after completing the above chores, remember to flip your mattresses, change your air filters, and test your smoke alarm batteries.

Keep track of what you’ve done, and what’s left to do, with this classic, 3-page Spring Cleaning Checklist from Martha Stewart.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Replace Cracked, Dirty Grout

March 26, 2012 By

How to replace groutTile is among the most versatile home surfacing materials. It can be as functional and good-looking on your home’s walls as it can be on counter tops, adding a polished look to your kitchen or bathrooms.

Tile is also easy-to-clean — so long as it’s well-maintained.

Proper tile cleaning is more than just a daily wipe-down. Cleaning tile requires a periodic resealing of the tiles themselves, as well as a re-grout for when the existing grout cracks, or stains.

Replacing grout is a job that’s low on skill but large on elbow grease. You can hire it out to a handyperson in Boca Raton , or you can handle it in-home. If you choose to replace your own grout, here are the steps you’ll want to follow.

First, you’ll need some tools :

  • Hammer and screwdriver
  • Grout scraper
  • Putty knife
  • Damp sponge
  • Dry cloths
  • Grout
  • Grout sealer

Start by using your screwdriver to loosen bits of the damaged and/or dirty grout. Tap the screwdriver with the hammer gently to avoid scratching your tile. Once you’ve loosened the grout, use the grout scraper to remove the remnants. 

Next, pour new grout into the crevices between the tiles and smooth it into place using the putty knife. The motion is similar to that of buttering a slice of bread. Scrape up the excess grout as you work. Continue spreading the grout until you’ve finished a several-foot section.

Before the grout has dried, use a damp sponge to wipe the tiles clean and neaten the grout lines. You can also use your finger to smooth and remove excess grout from between the tiles.

Repeat the grouting and cleaning process until all of the grout has been replaced. Allow the grout to dry for the length of time recommended by the manufacturer.

Next, using the dry cloths, buff the tiles, using a forceful, circular motion to remove any remaining grout residue.

Then, as a final step, for long-lasting protection, seal the grout using a commercial grout sealer from a hardware store.

Keeping grout in good condition does more than just make your kitchen or bathrooms look great — it protects the surfaces beneath the tile, too. Re-grouting tile is a basic home improvement task that can pay for itself many times over.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Store Your Winter Clothes For The Summer Season

March 19, 2012 By

Storing winter clothes for the summer As the Delray Beach weather turns warmer and the days grow longer, it’s time to pack away your winter clothes to make room for spring and summer things — just make sure to store your cold-weather clothes properly.

They’ll look better, wear longer, and will be ready to go when winter rolls around again next year.

Here’s what to do.

First, you’ll want to launder your winter clothes before you pack them up — even if they were never worn and/or don’t appear to be soiled. Clothes can sometimes have spots or stains that aren’t readily visible. Use unscented detergents, and skip fabric softeners and other additives that could attract insects.

Take items that can’t be washed to the dry cleaner.

Next, you’ll put your clothes into storage containers. Ideally, use bags or boxes that won’t degrade and will seal out dirt, dust, insects and moisture.

Fold clothing neatly before adding it to the container and pack “loosely”, allowing air can circulate. Tuck a lavender or cedar sachet into each container to help repel bugs. Both lavender and cedar are safer for use than mothballs and they smell much better.

For bulky items such as coats, use padded hangers and cover the clothing with heavy plastic wardrobe bags. If you don’t have padded hangers and don’t want to buy them, drape wood hangers with folded towels to fill in the shoulders of your coats without stretching them.

Keep the storage boxes and hangers in a dry place, away from sunlight. Sunlight can fade your fabrics.

Then, make sure to clean your closets thoroughly before filling them with the next season’s clothes. Dust the shelves and ceiling, wipe bars and flat surfaces, and give the floor a good vacuum.

Your closet will be clean and fresh and ready for the new season.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Remove Soap Scum From Shower Doors

March 12, 2012 By

Clean shower doorsDirty shower doors can ruin an otherwise sparkling-clean bathroom. The soap scum that accumulates isn’t just unsightly; it contains body oils and skin particles that provide for a perfect bacteria breeding ground.

Supermarket shelves in Boynton Beach are filled with bathroom cleaners that promise to cut through soap scum, but the cleansers don’t always work and those that do often contain harsh chemicals that can irritate your skin.

Cleaning shower doors can be more safe and more pleasant, then, when you use chemical-free household products, many of which you likely have in your kitchen already.

White vinegar makes an excellent soap scum remover, for example.

To remove soap scum from your shower doors using white vinegar, pour non-diluted white vinegar into a spray bottle, and then spray your shower doors until the soap-scummy sections are completely saturated. Let the vinegar sit for several minutes. This allows the white vinegar time begin breaking down the soap scum.

Spritz the surface again, if necessary, to keep the surface wet.

After the white vinegar has had some time to work, wipe the soap scum away with a non-scratching sponge.

If the soap scum is particularly stubborn, cutting through it completely may require a mild abrasive.

After letting the vinegar soak for several minutes, sprinkle baking powder on your sponge and remove the soap scum using a moderate amount of pressure and small circular motions. If your shower doors are textured, you may need to switch to a scrub brush to get into the crevasses.

Reapply baking soda and re-spritz the doors with vinegar as needed to remove the soap scum completely. Then, just rinse away the residue with hot water.

Give the shower floor a final rinse after the residue drains.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Keep A Stainless Steel Product Shining

March 5, 2012 By

Shine Stainless Steel

With their sleek, modern look, over the past 10 years, stainless steel appliances have move from “hot trend” to commonplace.

However, as any Delray Beach homeowner with stainless steel appliances will tell you, to keep a stainless steel surface free from marks, drips and fingerprints can be a futile exercise. Streaks and smudges will happen — they can’t be avoiding.

There are tricks, however, for keeping your stainless “shining”. You’ll need a microfiber cloth and a small bowl, plus some dish detergent, and some WD-40 or furniture polish. 

First, start with a single teaspoon of dish detergent in a quart of hot tap water. Using the microfiber cloth to avoid scratching the appliance’s surface, rub the mixture firmly in the direction of the steel’s grain.

Rinse the surface with clean, hot water and dry it immediately.

If the smudge remains, as a second attempt, spray a little WD-40 or furniture polish on the surface of the stainless steel appliance and buff the mark away using the microfiber cloth.

Then, if the smudge still remains, apply a small amount of rubbing alcohol to the appliance surface and — again with the microfiber cloth — rub in the direction of the grain. This will remove the mark, but it will also dull the stainless steel’s shine.

Therefore, to restore the appliance’s luster, use a small amount of WD-40 or furniture polish, or buff the appliance with a drop of mineral oil. 

You may also use a commercial stainless steel cleaner to clean your home’s appliance and these products work well. However, they’re often thick with chemicals and can be more expensive than one of the do-it-yourself solutions presented above.

Sometimes, though, it takes a specialty product to get the job done.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Clean An Exposed, Interior Brick Wall

January 17, 2012 By

How to clean exposed interior brickExposed interior brick can add a nice, decorative touch to your Boca Raton home, but because brick is a porous material and prone to staining, it can be cumbersome to clean.

Standard household detergents alone are rarely enough to clean brick properly, so if your home features exposed interior brick, plan to use alternative cleaning methods instead.

Here is how to do it.

First, find a pair of sturdy rubber gloves to protect your hands from the harsh brick surface and from your cleaning agents. Then, with a dry dish cloth, gently wipe the entire surface of the brick wall to remove loose dirt and dust.

Next, pour a grease-cutting dish detergent into a small bucket. Do not add water to the detergent. Add a small amount of table salt instead.

Mix well.

Next, apply a thin layer of the soap-and-salt mix to the bricks using a cloth and allow the mix to sit on the bricks for 10-15 minutes. Then, with a hard-bristled scrub brush, gently scrub the brick to remove the stubborn dirt.

Lastly, dip a clean dishcloth into a warm water-filled bucket and use the dishcloth to remove the detergent mix from the wall.

Allow the wall to air dry.

Cleaning exposed interior brick is more complicated than cleaning other household surfaces but a clean brick wall can help reduce in-home health hazards and keep your brick in its best possible condition for the long-haul.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Clean Your Microwave Without Harsh Chemicals

January 9, 2012 By

Clean microwaves, organicallyMicrowaves are often well-worn. Spills and splatters dot their ceilings; splattered food stuffs line their walls.

To clean your microwave, you can use the harsh chemicals on sale at supermarkets and hardware stores, or you can apply an all-natural approach which yields the same results, with only slightly more preparation time.

The extra time may be worth it, too, considering that the chemicals of an over-the-counter cleaner may seep into your foods over time.

To keep your microwave fresh and clean, using organic materials only, here’s what to do :

  1. Unplug your microwave from the wall for safety.
  2. Gather a microwave safe bowl; 1 1/4 cups of water; a lemon; baking soda; white vinegar; and cleaning cloths.
  3. Slice the lemon and place the slices into your bowl. Add the water.
  4. Heat the bowl in the microwave for 7 minutes. Leave the microwave door closed for an additional 5 minutes.
  5. Remove the bowl (CAUTION : Bowl will be hot).
  6. Remove the microwave’s glass cooking surface and wheel system. Hand wash and set aside to dry.
  7. Dip a clean cloth in the lemon water mixture. 
  8. Wipe down the microwave’s exterior and interior surfaces, remoistening the cloth as required.
  9. Moisten a clean cloth with vinegar. Wipe down the microwave door’s interior surface. 
  10. Replace glass and wheel system, and plug the microwave back in to the wall.

If you find lingering stains in your microwave, mix baking soda with water to form a thick paste. Dip a corner of your cleaning cloth into the paste and apply it to the stain directly, gently rubbing in a circular motion until the stain is gone.

Microwaves should be cleaned at least once weekly for optimal performance.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

How To Clean An Oriental Carpet

January 3, 2012 By

Clean an oriental rugIf you own oriental rugs, you’ll want to clean them at least once annually. But take special care — the process of cleaning an oriental rug is different from cleaning plain carpet.

Extreme caution is required.

To clean an Oriental rug, first vacuum the rug on both sides, then follow these cleaning instructions:

  1. Prepare a solution of cool water and gentle shampoo (i.e. shampoo without ammonia) 
  2. Test the solution on tiny corner of the rug to make sure that the rug’s colors won’t bleed
  3. Using a soft brush or dense sponge, brush the rug with the shampoo solution
  4. Use only light pressure and follow the “grain” of the rug
  5. Shampoo the rug’s fringe, then comb it gently with a large comb or brush
  6. Rinse the entire rug and press out as much water as possible
  7. Lay the rug flat and leave it to dry

After several hours, test the front of the rug for moisture. When it feels dry, flip the rug over to dry its back.

Note : Do not dry an oriental rug in the sun because the sun’s rays may cause it to fade.

Once both sides of the rug are totally dry, feel the top surface. If it feels stiff, crunchy or hard, take a dry brush and make gentle strokes. A light vacuuming will also do the job.

Oriental rugs that receive proper care can become family heirlooms, passed down from one generation to the next. Make sure you clean yours properly.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,

Make Better-Tasting Food On Your Grill

August 22, 2011 By

How to keep a clean grillLabor Day is nearing; the unofficial end of summer across FL. If you’re among the many Americans planning an end-of-season barbecue, you’ll want to make sure your grill is clean.

A clean grill makes better tasting food.

There are several ways to clean a grill but, for owners of gas grills, the first step always is to disconnect the gas source.

Next, open your grill and remove its metal pieces. This includes grates, trays and flame guards. Take these pieces to your kitchen. If the oven has a self-cleaning mechanism, place the items in your oven and let it “self-clean”. As the temperature reaches 900 degrees or more, residue will literally fall off your grill parts.

Be sure to wipe clean your oven once the cycle completes.

If your oven is not self-cleaning, wash the grill parts in your sink using hot water and detergent. You’ll want to soak the parts in soapy water if they’re especially dirty. Once clean, allow the parts to air dry.

Then, return to your grill and using a wire brush, scrape the residue from the sides, top and bottom of the appliance. Again, using a soapy hot water mixture, wash and wipe down the inside of the grill. Rinse it clean once the residue is removed.

Re-assemble your grill. 

Lastly, reconnect the gas source (if applicable) and allow the grill to burn for 5 minutes. This will burn off any lingering residue from the cleaning process, including soap and detergent.

And that’s it!

Plan on cleaning your grill at least twice annually with heavy use.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Filed Under: Around The Home Tagged With: , ,
Blog WebMastered by All in One Webmaster.